How to open it
On the dashboard, click a trail camera's row or the Detail button. The detail opens right below the row. At the top you see the name or model, the serial number, the location, days in the field and the status.
If you marked the trail camera as at risk, a red banner 🚩 This trail camera is flagged AT RISK with the date sits above everything else.
The buttons at the top
Not every button is always there. It depends on the trail camera's state:
- 🔍 Check — only for your own trail camera in the field that isn't stolen. Click it after you've been to the trail camera (swapped batteries or the SD card, or just checked it). It saves the date of the check: it shows as 🔍 Last check in the location card and as an entry in the history. It doesn't change the battery estimate — for that, enter the new battery level under Edit.
- 🍎 AirTag reported — only for your own trail camera with an AirTag ticked. Enter the date and time when the AirTag showed up in Find My. The entries are listed in the Seen by AirTag tab.
- 3D visualization — only for a solar trail camera in the field with GPS and a lens direction (azimuth) filled in, when the panel isn't marked as covered and the trail camera isn't stolen. It opens a 3D view of the real terrain around the trail camera, the sun's path across the day and the panel direction.
- Edit — only for your own trail camera. Opens the trail camera form.
- 📊 End Monitoring — only for your own trail camera in the field that has GPS and isn't stolen. It asks how many videos or photos you got, how many were interesting, how happy you were with the spot (1–5 stars) and for optional notes. If monitoring failed for technical reasons (flat batteries, a bad SD card), tick Technical issue — do not include in location stats — the rating is saved but doesn't count towards the spot's score. There are also optional fields for scientific data sharing. After saving, the rating is stored under Locations, the trail camera switches to At home and the details tied to that deployment are cleared: location, GPS, deploy date, planned days, recording settings, battery level, panel power, terrain, lens direction and field of view. When you deploy it next time, you fill these in again for the new spot.
Location and orientation
When the trail camera is at home, the card only says that location, azimuth and terrain are entered when you deploy it. In the field it shows:
- the lens direction on a compass and the field of view (or Azimuth not set),
- GPS with a link to Google Maps,
- 🌲 Terrain and the share of light it means — only for solar trail cameras,
- 📐 Zone, if the trail camera is in one,
- the purchase date, the deploy date (with time, if entered) and days in the field,
- 🔍 Last check, the theft date and the date it was found, if they apply,
- 🪪 Missing data — what's still missing for this trail camera (GPS, serial number, IMEI, MAC).
Battery and solar
The battery estimate only runs for your own trail camera in the field with GPS filled in. Otherwise the card says why:
- at home — the solar balance and live weather start after you deploy it,
- stolen — the estimate and weather tracking are paused,
- someone else's trail camera — the estimate is only for your own trail cameras,
- no GPS — weather and the solar balance can't be calculated, fill in the location.
When the estimate runs, the card shows:
- the battery percentage and a bar, the power type, the panel power and tilt, and backup batteries with their state, if the trail camera has them,
- for solar trail cameras, a label in the card header: Charging – panel gives X % of its max output, Draining with the reasons (frost, fog, cloud cover, canopy shade or little sun), Night — not charging, Panel covered or Running on backup batteries,
- Draw now, Solar now and Balance now in mA,
- the current weather at the trail camera: conditions, temperature, cloud cover, solar radiation, sunrise and sunset and the time the data is from,
- Total — how much the battery has given and the panel has added since the estimate started,
- usable capacity in percent, when it's cold,
- warnings for fog and snow,
- Mode (video with resolution and length, or photo) and Activity (recordings per day and night).
How the percentage is calculated is explained in How we calculate the remaining battery.
Security and GPS
The card header shows how many protection items the trail camera has (or No protection). Below are chips for every ticked item: GPS trackers (AirTag, Smart Finder, Tile, SmartTag, other), security (padlock, cable lock, metal box, password, monitored by another trail camera, built-in GPS) and bait files (HTML, phone).
Then the S/N, MAC address (for Wi-Fi models or when filled in) and IMEI (for SIM models or when filled in). A trail camera with 🛰️ Built-in GPS tracking also shows a Firmware key (GPS) — the key you put into the trail camera's firmware so its position reports are matched to it. For someone else's trail camera, the Owner is shown. At the bottom is 💰 Value — the body plus accessories.
The tabs at the bottom
- Trail Camera History — always there. Every trail camera has its own history, and entries are added automatically: the trail camera added, deployed, a change of location, GPS or power, security items, GPS trackers and accessories added or removed, a status change, a check, flagged at risk and cleared, stolen, reported to police, found, monitoring ended, an AirTag report and every detection from a bait file. The history is split into periods: IN FIELD, AT HOME, TEST and STOLEN, each with its start date and length. For each period you see the state, location, GPS, from–to, and if you ended monitoring, also the number of videos, interesting ones, people and the rating. Below are all events of that period. You can delete a single entry or a whole period.
- Specifications — the model's specs from our catalog: type, battery, power, standby draw, draw per photo, 4G draw, video, field of view and features. For a custom trail camera without a profile there are no specs and the battery estimate uses default values.
- Seen by AirTag — only for your own trail camera with an AirTag. A list of the times you entered with the 🍎 AirTag reported button.
- Photos from trail camera — for your own trail cameras. It shows an email address for this trail camera. Set it in a 4G trail camera as the email recipient, and the photos it sends show up here within a few minutes.
- 👮 Theft Case File — only when you've ticked that the theft was reported to the police. A timeline of the case: police, authorities, decisions. You add entries with a type, date and description, and attach up to 5 documents (PDF, JPG, PNG), each up to 10 MB. The case status is shown at the top.
Try it
You can click through the detail in the demo on the home page, no registration needed. Your own account is free.